Home Airsoft Reviews GRENADE DETONATOR 40 MM CO2 KYOU AIRSOFT / AIRSOFT REVIEW

GRENADE DETONATOR 40 MM CO2 KYOU AIRSOFT / AIRSOFT REVIEW

7
0
GRENADE DETONATOR 40 MM CO2 KYOU AIRSOFT / AIRSOFT REVIEW





AIRSOFT REVIEW welcomes you for this new review Today I will present to you two complementary accessories from KYOU AIRSOFT It is therefore the DETONATOR 40 grenade and the CO2 charger, the first grenade of its generation to be able to operate on CO2.

Pairing these two accessories will give you an advantage over your opponents let’s move on to the characteristics of the pomegranate It is therefore made entirely of metal with the exception of the intake valve which is made up of 5 elements.

the striker, the spring, the valve, the 3 guide balls and 2 seals The Detonator grenade is composed of 3 parts (the warhead, the chamber and the base) Unlike other grenades on the market, the CO2 or gas is loaded through the base and not on the warhead Its operation with CO2 will make this grenade irreproachable for its use in low temperatures.

the capacity of this model is 96 BBs in 6 mm and works either by CO2 but also GAS and compatible with all 40 mm grenade launchers Precautions to be taken: this grenade develops a power of 1.8 joules depending on the cartridge used it will therefore be necessary to use this grenade in the safety conditions for your game and especially in CQB let’s move on to preparing the pomegranate turn the grenade over and charge with CO2 to fill through the base and then fill the bullet with 6 mm balls never do the opposite in the risk of a premature triggering of the grenade and the wearing of glasses during its preparation is strongly recommended Let’s move on to the Interview Tips: Maintenance is to be carried out every 3 uses using EASIWORK 350 grease 1.

grease the ejection valve seal 2. Grease the stop seal all around the nose cone and under the pressure of the balls and gas. (if the seal is not greased you risk damaging it) 3.For the inlet valve: lubricate the internal seal regularly because during the passage of gas the seal freezes and the lubrication disappears let’s move on to the characteristics of the CO2 charger: To be able to charge your detonator grenade with CO2, you just need to acquire the KYOU AIRSOFT CO2 charger.

The charger is full metal and equipped with a pressure control manometer It therefore makes it possible to fill in CO2 all the replicas or accessories suitable for this GAS and only this one under penalty of bursting your tanks.

let’s move on to the installation of the CO2 cartridge Open the top of the magazine and insert the cartridge into the well and screw the head back on TEST carried out indoors to see the expulsion of the balls (impact distance 25 meters) Actual speed Slow motion Here is the review of the DETONATOR grenade and the CO2 charger from KYOU airsoft completed The grenade is also available with the customizable engraving option or in a model predefined by KYOU airsoft Find all the links necessary to acquire these accessories in the description of the video As well as all the AIRSOFT REVIEW links, and a little novelty on our official website you will be able to subscribe to our newsletter today to receive the site’s news in real time See you very soon bye bye





LEAVE A REPLY

Please enter your comment!
Please enter your name here