Hi. Today, episode #22 with Krytac review, the latest newcomer in airsoft M4-CRB (10’ handguard, 469€), M4-SPR (13’ handguard, 499€) CRB is 360fps, SPR is 400fps Krytac is the airsoft branch of Defiance (producer of the Kriss Vector).
Box is nice, handbook is high quality. Inside the box: gun, magazine and its key, rod, front and rear sights Motor seems good. It has 30k rounds/minute and is on ball bearing. It’s an hybrid between High-Torque and High-Speed as it shoots 20 BB/s and allows a 400 fps muzzle speed.
Close-up details Gun is beautiful and very well made. However, the plastic of the handgrip and the flash hider is poor. Anyway, it’s a very special gun. I have not found any manufacturing issue The gun has a keymod handguard and a specific buttstock (with a hole for the sling).
The buttstock end seems made of good quality plastic. Buttstock holes allow to see the position via numbers. Batteries go in the buttsotck. Do not lose the little plastic piece. Buttstock allows 2 stick batteries or LiPo batteries Fire mode selector is realistic and can be used with both hands.
The bridge is designed to be used with gloves Markings : Krytac (buttstock), Fire modes, Logo and serial number (magazine weel), Virginia Beach USA (handgaurd) The gun has by default a steel attach sling.
Ring is available on both sides. The bolt catch and fake lever are working and very high quality High cap magazine. Use the gear or the key. I don’t think it’s good quality. Let’s open the gun together.
The pin is protected by a 6 pans screw. Inner barrel and hop up block are interesting: internal barrel is held inside the outer barrel by a joint to prevent vibrations The hop up block is held together with the outer barrel and the nozzle by two separate springs.
The hop up wheel has numbers and gears. It allows a better handling of the settings A specific part holds the rubber at the right place and allows it to be removed easily. Grzt hop up block, inner barrel is 6.
05 mm Specific Krytac Gear-Box, good for technical users. Remove it and you can change the spring. Holes are punched to allow easy greasing. The box is designed with specific angles to limit break ups.
The fake bolt is very nice and is working. The gear box has by default a mosfet, 8mm bearings, polymer piston with 4 metal teeth, hardened gears holding on springs Regular handling, very comfortable buttstock Assembly is flawless I believe we need to change the handgrip and the flash hider.
The upper ris rail is optional. Addition rail may be attached to the keymod. You should not touch the mechanical part, it’s working fine as it is Semi shooting test Full auto shooting test Reactivity and rate of fire are impressive.
I have a good feeling about this gun. Thanks to JB Airsoft. Don’t forget to subscribe,and see you soon in Bas les pattes.